K11 Rubber Film Waterproof coating

Short Description:


Product Detail

Product Tags

Anti Water

Anti Corrossion

Anti Rusty

Anti Impact

Anti Slip

Anti Abrasion

Product Details

is a kind of waterproof material which is modified by alkali-resistant synthetic cement substrate.

Technical data:

item I II
Tensile strength Mpa      ≥ 1.2           ≥ 1.8
elongation ≥200 ≥80
impervious 30min  0.3mpa 30min   0.3mpa
Low temperature bendability -10 degrees -10 degrees
  Heat resistance  100 degrees Heat resistance  100 degrees

Product features:

It can be applied on the wet base surface, and the waterproof layer has high mechanical strength and good wear resistance. 2. The coating can prevent moisture, salt pollution and inhibit the growth of bacteria. 3. The concrete can still maintain ventilation. Based on this product, the waterproof layer can be directly tiled, mosaic and so on. 4 Consistently high hydrostatic pressure with a negative water surface. 5 This product has a white and gray appearance.

Application process:

The base layer must be clean, solid, smooth, dry, ash-free, and sand-free

Pour the liquid material into the pre-prepared container according to the ratio, and then pour the powder into the liquid material in a ratio to stir well until the liquid, powder and.

Use a roller, a sprayer or a brush to evenly roll or spray the agitated slurry onto the cement base. The coating is 2-3 times, and the coating thickness is applied according to the design requirements.

The order of the coating is about 4 hours after the first application, the coating is dry and then painted in the direction of 90 degrees vertically, and so on.

After the construction is complete, it is forbidden to step on it within 24 hours. After it is completely dried, it can be used for other coverings (such as plastering, tiling, mosaic). 

vxvx
dasfg
casf

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Swimming pool waterproof coating

      Swimming pool waterproof coating

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Product Details Mn-j55 anticorrosive and moisture-proof coating J55 type anticorrosive coating is composed of modified chlorosulfonated polyethylene, epoxy, acrylic acid and a var...

    • Transparent Waterproof Glue

      Transparent Waterproof Glue

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Product Details Transparent waterproof adhesive for inner and outer walls is a kind of viscous liquid, which is mainly made of transparent colloid and various additives. After coa...

    • Non Cure Bitumen Rubber Waterproof Coatings

      Non Cure Bitumen Rubber Waterproof Coatings

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Product Details Non Curing Liquid Rubber Modified Bitumen Waterproof Coating for Roofing, Ground Non curing liquid rubber asphalt waterproof coating ingredients: High quality asph...

    • Waterproof Butyl Tapes

      Waterproof Butyl Tapes

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Features Strong Adhesive The aluminum foil adhesive tape adopts high polymer synthesis butyl glue, which owns strong adhesive ability.The aluminum foil adhesive tap...

    • SBS Modified Bitumen Waterproof Membrane

      SBS Modified Bitumen Waterproof Membrane

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Product Details For structures that routinely encounter heavy foot traffic on the roof, modified bitumen continues to be a time-tested, popular roofing system. Often times, it is ...

    • PVC Waterproofing Membrane

      PVC Waterproofing Membrane

      Anti Water Anti Corrossion Anti Rusty Anti Impact Anti Slip Anti Abrasion Product Details China Exposure used PVC Waterproof Membrane for Roofing PVC membrane roll is an excellent high-quality polymer waterproof sheet, made of PVC resin by adding plasti...